Make-Safe Tree Removal

Make-safe tree removal is the first job on a storm claim: get the tree off the house, shed or driveway, stop the damage getting worse, and leave the site safe enough for the builder to start. Dynamic Tree Solutions does make-safe tree work across Brisbane’s southside, Logan and Ipswich for insurance builders, loss adjusters, property managers and homeowners, with qualified arborists, excavators with grabs, cranes and chipper trucks, and the paperwork the claim needs on day one.

Builder, adjuster or property manager with a tree on a structure? Call 1300 239 626 or send the address and photos through the form below. Homeowners: same number, same crew.

What is a make-safe in tree work?

In insurance language a make-safe is the emergency work that stops further damage before the proper repair is scoped. For a tree, that means getting the weight off the structure and removing anything that could still fall. It is not the full removal of the tree, the stump or the mess; that comes later and is often a separate line on the claim.

A typical make-safe from us looks like this: the crew arrives, isolates the area, checks for powerlines and calls Energex if a line is involved, then lifts or rigs the tree off the roof so the builder can tarp it and the owner can get the water out. Hangers and split limbs over the house come down at the same visit. Timber and brush are either chipped on site or stacked clear, depending on what the claim covers. Photos before, during and after, and the owner and the builder both get them that day.

Large tree blown over across a carport and house roof after the 11 November 2026 storm, root plate torn out, debris over the yard
Day one after the 11 November supercell: the tree has to come off before anyone can tell what the roof needs.

Who do you do make-safe tree work for?

  • Insurance builders and restoration companies. You hold the claim, you need the tree gone before your carpenter or roofer can start, and you need an invoice that goes straight into the claim file without questions. That’s the job.
  • Loss adjusters and assessors. We’ll meet you on site, or send the photos and a written note on how the tree failed so you can scope the structural repair without a second visit.
  • Property managers, body corporates and strata. A tree across the common driveway at a unit complex, or on a rental’s shed, with a tenant who can’t get out. We deal with the agent, the owner and the insurer as one job.
  • Homeowners. Most storm calls still come straight from the owner. If the insurer or the builder hasn’t allocated anyone yet, we do the make-safe and hand the file to whoever picks up the claim.

What does an insurance builder get from us?

What you needWhat we send
ResponseTriage by risk: tree on an occupied house with water coming in goes first, tree on a back fence waits. Storm weeks run on a list and we tell you where you are on it.
ComplianceCertificates of currency (public liability, WorkCover), SWMS for the job, qualified arborists on every crew, Energex coordination where a line is involved.
ScopeMake-safe, full removal, stump grinding and debris each as a separate line, so the part the policy covers is clear and the owner can decide on the rest.
EvidenceDated before/during/after photos, a written description of the failure (root plate, stem snap, limb tear-out), and an AQF Level 5 arborist report if the insurer wants cause of damage in writing.
PaperworkItemised invoice with ABN and GST, claim number on it, sent the same day. Purchase orders fine. We’ll talk to the assessor directly if that’s quicker.
GearExcavators with rotating grabs, crane hire for trees through roofs, 33 m spider lift for tight access, chipper trucks, tracked stump grinders, traffic control when the tree is on the street.

How does a storm make-safe actually run?

  1. Call or photos. Address, what the tree is on, whether anyone is inside, whether there’s a line down. That’s enough to triage.
  2. Powerlines first. Anything touching a line waits for Energex. Nobody on our crew works live, and nobody should.
  3. Lift, don’t drag. A trunk through a tile roof gets lifted straight up with the grab or the crane so it doesn’t take more tiles and battens with it. Then it’s cut in sections on the ground.
  4. Clear the hazards. Hangers, split stems and anything still leaning on the structure come down at the same visit, because they’ll fall on the roofer otherwise.
  5. Hand over. Photos and the failure note to the builder and the owner. Tarping is the builder’s job; we’ll leave the roof clear for it.
  6. The rest, if wanted. Full removal, stump, chip and clean-up quoted separately so the owner and the insurer can decide what’s covered.
Excavator grab lifting a snapped tree trunk off a crushed colorbond shed after the November 2026 Logan storm, crew standing clear
Grab on the trunk, crew clear, weight off the shed. The make-safe is done when the builder can work underneath.

What about the November 2026 storms?

The supercell that went through Logan on Wednesday 11 November is the kind of event this page exists for. Logan City Council recorded gusts up to 125 km/h, at least 14 homes were left uninhabitable, Energex reported more than 400 powerlines down with close to 60,000 Logan properties off supply, and the SES logged around 300 tasks across the city that night. The Insurance Council of Australia declared it a Significant Event, and by 16 November insurers had taken more than 4,600 claims from the storms, mostly fallen trees, damaged roofs and fences and water in homes. Our crews have been on make-safe work from Crestmead and Marsden to Chambers Flat, Jimboomba and Logan Village since the Wednesday night, and the forecasters are warning of more cells through late November. If you’re a builder with a storm allocation in Logan and your usual tree contractor is flat out, ring us.

Where do you do make-safe tree work?

Brisbane’s southside and west, all of Logan and Ipswich, from our yard at Ellen Grove, and further for commercial and civil storm work. Suburb pages for the areas we’re in most this month: Regents Park, Chambers Flat, Logan Reserve, Crestmead, Marsden, Jimboomba, Logan Village, Park Ridge, Greenbank and Goodna. For a tree that’s down but not on anything, see emergency tree removal; for a tree still standing that worries you, dangerous tree removal.

Book a make-safe crew

Call 1300 239 626. Builders and adjusters: put the claim number, the address and your contact in the message and we’ll ring you back with a time. Homeowners: your suburb and a photo of the tree is enough.

    Tree Pruning & MaintenanceTree RemovalEmergency & Storm ResponseCivil Projects

    Stump GrindingLand Clearing & FirebreaksCommercial Tree Services

    Make-safe tree removal: common questions

    Does home insurance cover make-safe tree removal?

    Usually, where the tree has damaged an insured structure; the policy generally covers removing the part of the tree that’s on the building so the repair can happen. Removing the rest of the tree, the stump and trees that fell without hitting anything is often not covered. Check the PDS and ask the insurer, and have us quote the covered and uncovered parts as separate lines so there’s no argument later.

    Do I ring the insurer or the arborist first?

    Energex first if a line is involved. Then the insurer, to get a claim number, because some insurers want to allocate their own builder. Then us. If rain is coming in and the insurer’s queue is long, ring us anyway: a make-safe you arrange yourself is normally reimbursable, keep the invoice and the photos.

    Can you work directly for an insurance builder?

    Yes. Purchase order or email instruction, your claim reference on everything, invoice to you. Tell us what your claim file needs and it comes with the first email, not after three reminders.

    How fast can you get to a make-safe?

    Storm weeks are triaged by risk, not by who rang first. A tree on an occupied house with water coming in is same day where we can; a tree on a shed or fence may be a day or two. We tell you where you sit on the list and we don’t promise what we can’t do.

    Do you remove the stump as part of the make-safe?

    No. Stump grinding is a separate job and usually a separate line on the claim. We can do it the same week once the make-safe is done. See stump grinding.

    Who writes the report if the insurer asks why the tree failed?

    Our AQF Level 5 consulting arborists. A short cause-of-failure note comes with every storm job; a formal arborist report is quoted separately if the insurer or a dispute needs one.

    Call Now Button
    Review us on Google